6
This unit includes a display that counts down the time to replace the filter cartridge.
CB073E- Faucet Mount System with Digital Filter Indicator
After installing faucet mount system for the first time,
press and hold the RESET button until the display lights
all bars (approximately 1 second).
After replacing the filter cartridge, press
and hold the RESET button until the display
lights one bar (approximately 3 seconds).
Lifetime:
approx. 3 months
When Reset
All bars lit up
Lifetime:
approx. 2 months
Lifetime:
approx. 1 month
Time to replace
the filter cartridge
6. Replacing the filter cartridge
Pull forward to detach filter cartridge.
Dispose of used filter cartridge in accordance with local waste regulations.
Insert new filter cartridge. Slide filter cartridge back until it clicks.
Lifespan of filter cartridge may vary based on the amount of water used, water quality,
water pressure, etc.
In general, replace your filter cartridge under the following circumstances:
- When the odor or taste of chlorine is detected
- When the flow rate/volume has substantially lessened – e.g. it takes 15 seconds or longer to fill a cup
7. Maintenance
Rinse the unit with water and use a soft cloth to clean it. Do not use harsh detergents.
After cleaning, set the filter to tap water spray mode and allow to run for a few moments.
Rubber seal within unit may wear over time, replace as needed.
CB073E – Clean LCD display by wiping display with clean, dry cloth.
