INSTALLATION MANUAL
DROP-ARM AWNING V124 - CALPE
12771999-19830EN
3
Subject to misprints, errors and technical modifications.
1.1 Marking the holes
The wall supports need to be installed 10 to 15 centimeter from the ends (figure 1.1).
Optional remaining wall supports need to divided equally between the two outer wall supports.
Mark the holes for the wall supports (A). These holes need to be aligned level, horizontal and vertical. See figure 1.2.
Make sure that there are at least two holes in the middle of a stone.
View figure 1.3. If necessary, use an alignment string.
Figure 1.2 Installation of the wall supports.
Figure 1.1 Marking the wall supports
A
muursteun
A
muursteun
X
1. Installation of the wall supports
X = width of the awning.
Y = installation height (from the ground).
A = wall supports.
X
Y
A
A
X = Width of the awning
A
Wall support
A
Wall support
