INSTALLATION MANUAL
DROP-ARM AWNING V124 - CALPE
12771999-19830EN
10
Subject to misprints, errors and technical modifications.
5mm
50mm
1. Determine the position of the strap guide
(50 mm to 100 mm below the boxing of the
drop-arm awning) and mark both holes on the
window frame or the wall. Make sure that the
strap and strap guide are aligned!
2. Drill the holes.
3. Place the plugs and install the strap guide with
two countersunk screws.
4. Put the pull strap through the strap guide.
Make sure that the pull strap is not twisted.
5. Determine the position of the strap coiler and
mark both holes on the window frame or the
wall. Make sure that the strap and the coiler
are aligned!
6. Drill the holes.
7. Place the plugs and install the strap coiler with
two countersunk screws.
8. Fold the end of the pull strap double and cut
a little hole.
4. Instruction for placing the strap coiler (outside)
