VERACHTERT
CAG adapter plates with grab suspension
all rights reserved
07.06
8
4. Installation of the Connect’o’maat® adapter plates with grab suspension
Installation of the Connect’o’maat® adapter plates with grab suspension can
only be carried out by well qualified technical personnel.
Mount the CAG using a hoist to the grab of the piece of equipment. Lock the mounting
pin of the grab of the piece of equipment correctly. See the manual of the grab of the
piece of equipment.
Warning:
Never put your fingers in the mounting eyes to check the alignment of the holes!
The Connect’o’maat® adapter plates with grab suspension are fitted with adapter
plates for the Connect’o’maat® quick coupler system. Refer to the operating manual of
the Connect’o’maat® for connection to an excavator.
