- 25
Veo Europe_VIPN-2xxx Observer Plus_UserManual rev1.0 EN
8-4.Alert IN Setup
8-4-1.Alert IN Setting
When Alert IN function is enabled, the user
can setup the mail function to send the
motion-detected images to the preset mail
address when extra device triggered.
The procedures are as follow:
Motion Detect set to “Enable” state.
Requires External Motion Detector.
8-4-2. Alert IN with Motion detected mail function (Mail Setting)
When motion detection and Alert IN is enabled, the user can setup the mail function
to send the motion-detected images to the preset mail address. The procedures are
as follow:
Motion Detect set to “Enable” state.
Setup the “SMTP Mail Server” and E-Mail address.
(Password use or not)
Enter the
sender’s email address in “Sender” field
and the recipient’s email address in the “Receiver”
field.
The u
ser can change the “Subject” field.
If the mail server needs authentication, check the
“Password” check box. Also, enter the password; otherwise the “Password” field
does not need to be filled in.
Check the “Send mail when motion detected” check box to enable the operation.
If the check box is not checked, the motion detected send mail function will not
be enabled.
Confirm by selecting [Save Settings] option to save the settings.
