Venturo HT50KX, Инструкция по установке и эксплуатации

Страница: 29 / 52

22245
C200
2-26-08F
WIRE ROPE INSTALLATION DRAWING
ET8K AND LARGER CRANES
SUPERCEDES
TITLE
DATE
SECTION
CINCINNATI, OHIO MANUFACTURING, INC.
STEP
1:
UNWIND COIL OF WIRE ROPE BY 'ROLLING' ALONG THE FLOOR. THIS WILL PREVENT 'KINKING'.
STEP
2:
INSERT WIRE ROPE END THROUGH ANTI-TWO-BLOCK WEIGHT.
STEP
3:
INSERT WIRE ROPE END INTO POCKET OPENING ON WINCH AND THROUGH WEDGE POCKET AS SHOWN IN (FIG 1).
CAUTION:
IF
THE WIRE ROPE IS NOT INSTALLED
FOR THE CORRECT DRUM ROTATION, THE WINCH BRAKE VALVE WILL NOT HOLD THE LOAD.
CAUTION:
T
HERE MUST ALWAY BE AT LEAST
(3) TURNS OF WIRE ROPE ON THE WINCH DRUM WHILE UNDER LOAD.
NOTE:
SOME WINCHES WILL BE SUPPLIED
WITH A HEX NUT IN LIEU OF A WEDGE FOR INSTALLING THE WIRE ROPE.
WIRE ROPE INST
ALLA
TION
8-18-09G
FIG 1