ANSWERING A CALL
• Intercom
– When the intercom is calling, display shows the identity (ID) number of the calling
handset
– The user answers the call by pressing YES and ends the call by pressing NO.
– Pressing NO during ringing rejects the incoming call and both calling and called
handsets return to standby state.
• External
– Similar to internal incoming call, display shows the caller number, call time.
– The user can answer the call by pressing YES or reject the call by pressing NO.
MAKING A CALL
• Calling another Internal Handset
This is a very simple procedure - press the INT button followed by the handset number.
If the called handset number does not exist, respond or the handset is busy, the user will
be given a “busy tone”.
• Calling an External Number Dialling
In this case, the user goes ‘off hook’ using the YES key, then dials the number in the
standard way.
Once the user has chosen to go off-hook, the phone has no way of sensing that the dialing
of the number is finished. Once digits have been entered and keyboard activity has
ceased, the display will revert to showing the elapsed call duration after a 5-second
timeout
Pre-dialing
Here the user enters the number and can edit and correct it before going ‘off hook’, at
which point the number is actually dialed.
• Calling from Alphanumeric Memory
The user dials a number, which has already been stored in one of the alphanumeric
memories. Entries in the memories are stored in alphabetical order, or in the case where
there is no alpha information or two memories have the same alpha name, they will be
stored in the order in which they were entered.
If a number exceeds 12 digits, the first 12 digits are shown initially. The remaining digits
can be viewed by pressing
4
button once more.
As with other lists and menus, the memory lists will wrap around.
• Last Number Redial
In standby mode, press the R/P button to show the last dialing number on display.
User can select up to last ten external numbers by pressing
5
/
6
button.
These are stored in chronological order, with the most recent being displayed first.
Thereafter, presses the YES button to dial it out.
If there are no numbers in the list, then the redial button will show “NO ENTRIES”.
As with other lists and menus, the redial list will wrap around.
TELEPHONE OPERATION
10
9025_ib_us2.p65
11/21/02, 12:11 PM
11
