venture CTS350, Руководство пользователя

Страница: 6 / 10

4
3. Installing the seat:
c. Insert the seat fasteners to lock the seat in
position.
d. To adjust the seat pull the latch and
manually raise or lower as required.
b. Headlamp –
i. The headlamp is controlled by a 2 position switch – on/off.
ii. Before use remove the plastic covering over the lamp glass.
c. Speed control –
i. The speed control switch has 3 positions labelled 1,2,3
a. To install the seat slide the seat rods
into the associated tubes on the
main frame.
4. Identifying the controls:
!" #$$ %&'()&$* +&) &,-)!(.'/ (0- 123456 !)- 7&8'(-9 &' (0- 0!'9$-:!)*
ii. The lowest speed is obtained when the switch is in the 1 position
and the highest at the 3 position. If you need to climb a hill the
speed switch will need to be in level 3
b. Position the seat legs with the
mounting holes matching the lugs at
the rear of the scooter
e. The seat should be lowered when folding
the CTS350