WNF/U/2016
10/34
tel. (22) 751 95 50
www.venture.pl
fax. (22) 751 22 59
ENGLISH (Translation)
INTRODUCTION
Please read this instruction carefully to avoid improper use of the dust collector or its damage. The personnel operating WNF
dust collectors are required to read this instruction carefully. Improper use and installation of the dust collector may render the
guarantee void. Unauthorised changes inconsistent with this instruction may also invalidate the guarantee.
Upon acceptance of the dust collector please check whether:
1.
The type and size of the collector unit comply with the order,
2.
Information on the nameplate is consistent with preferred parameters (voltage, frequency, output, etc.)
3.
The dust collector has not been damaged in transport.
Should any damages be found, please contact the point of sales or the SERVICE TEAM of Venture Industries.
1.
INFORMATION AND WARNING SIGNS
2.
GENERAL INFORMATION
WNF dust collectors are designed for sucking and collecting chips and dust produced in wood or plastics processing. With a
flexible rod the collector may be connected directly to the processing machine. Chips are collected into a plastic bag, which –
once filled up – can be removed and discarded together with the contents. This facilitates trouble-free and swift removal of
waste.
NOTICE!
USING WNF COLLECTORS FOR TRANSPORTING EXPLOSIVE,
AGGRESSIVE AND TOXIC MATERIAL OR FOR TRANSPORTING AIR OF EXTREME
MOISTURE AND/OR TEMPERATURE OF MORE THAN 60°C IS PROHIBITED.
NOTICE!
APPROACHING THE DUST COLLECTOR IN LOOSE-FITTING CLOTHES
OR EXTENDING HANDS TOWARDS OPEN FEED OF THE WORKING UNIT
MAY RESULT IN SERIOUS INJURY! DO NOT LOOK INTO THE WORKING
COLLECTOR UNIT BECAUSE OF RISK OF FACE AND EYES INJURY!
- High voltage
- General caution sign
- Danger of finger injury
- Direction of proper unit rotation
