background image

15

  MANUFACTURER’S WARRANTY

The manufacturer hereby warrants normal operation of the unit over the period of 24 months from the retail sale date provided the 

user’s observance of the transportation, storage, installation and operation regulations. 

Should any malfunctions occur during the unit operation due to manufacturer’s fault during the warranty period the user is entitled to 

elimination of faults by means of warranty repair performed by the manufacturer. 

The warranty repair includes work specific to elimination of faults in the unit operation to ensure its intended use by the user within the 

warranty period. The faults are eliminated by means of replacement or repair of the complete unit or the faulty part thereof.

The warranty repair does not include: 

• 

routine maintenance;

• 

unit installation / dismantling; 

• 

unit setup.

To benefit from warranty repair the user must provide the unit, the user’s manual with stamped sale date and the payment document 

certifying the purchase. 

The unit model must comply with the one stated in the user’s manual. 

Contact the Seller for warranty service.

The manufacturer’s warranty does not apply to the following cases:

• 

user’s failure to provide the unit with the entire delivery package as stated in the user’s manual or with missing component parts 

previously dismounted by the user; 

• 

mismatch of the unit model and make with the respective details stated on the unit packing and in the user’s manual; 

• 

user’s failure to ensure timely technical maintenance of the unit; 

• 

external damage to the casing (excluding external modifications of the unit as required for its installation) and the internal com-

ponents of the unit; 

• 

alteration of the unit design or engineering changes of the unit; 

• 

replacement and use of the unit assemblies, parts and components not approved by the manufacturer; 

• 

unit misuse; 

• 

user’s violation of the unit installation regulations;

• 

user’s violation of the unit control regulations; 

• 

unit connection to the power mains with a voltage different from the one stated in the user’s manual; 

• 

unit breakdown due to voltage surges in the power mains; 

• 

user’s discretionary repair of the unit; 

• 

unit repair performed by any persons not authorized by the manufacturer;

• 

expiry of the unit warranty period; 

• 

user’s violation of the established regulations specific to the unit transportation; 

• 

user’s violation of the unit storage regulations; 

• 

wrongful acts against the unit committed by third persons; 

• 

unit breakdown due to circumstances of insuperable force (fire, flood, earthquake, war, hostilities of any kind or blockades); 

• 

missing seals if provided by the user’s manual;

• 

failure to provide the user’s manual with the sale date stamp;

• 

missing payment document certifying the unit purchase.

 

FOLLOWING THE REGULATIONS STIPULATED HEREIN WILL ENSURE A LONG 

AND TROUBLE-FREE OPERATION OF THE UNIT.

 

USERS’ CLAIMS SHALL BE A SUBJECT TO REVIEW ONLY UPON PRESENTATION OF 

THE UNIT, THE PAYMENT DOCUMENT AND THE USER’S MANUAL WITH THE SALE 

DATE STAMP.

Содержание VUT 1000 H



















Отзывы: