Vents VUT 100 P mini, Руководство пользователя

Страница: 10 / 15

10
VUT 100 P mini
MAINTENANCE
The unit must undergo technical maintenance 3 to 4 times a year. Maintenance includes general cleaning of the unit and the following
operations:
1. Filter maintenance.
Contaminated filters increase air resistance thus impairing supply air delivery into the premises.
The filters should be cleaned as they get dirty, but at least 3-4 times a year. Vacuum cleaning for the air filters is allowed. After two
consecutive cleaning the filters must be replaced. For new filters contact your Seller.
FILTER PULLING PROCEDURE
1. Remove four triangular screws.
2. Remove the filter covers.
3. Pull the filters downwards to remove.
1. Undo four clips.
2. Remove the service panel.
3. Turn the retaining support to loosen and remove the heat exchanger.
HEAT EXCHANGER REMOVAL AS FOLLOWS
DISCONNECT THE UNIT FROM POWER SUPPLY PRIOR TO MAINTENANCE.
DISCONNECT THE DRAIN PIPE PRIOR TO HEAT EXCHANGER MAINTENANCE.
1 2 3
1 2 3
2. Heat exchanger maintenance.
Even regular technical maintenance may not completely prevent dirt accumulation on the heat exchanger casing. Clean the heat
exchanger on a regular basis to ensure high heat recovery efficiency. To clean the heat exchanger remove it from the unit and wash with
warm neutral detergent solution. Re-install the dry heat exchanger into the unit.