Vents VUE 200 B EC, Руководство пользователя, Страница: 8 / 20

www.ventilation-system.com 8
AIR FLOW DIRECTION
The air flow direction for various operation modes of the VUT/VUE 200 V(B) EC unit is shown below
Heat recovery mode
Freeze protection mode Summer cooling mode
Supply fan is off Bypass duct is closed Bypass duct is closed
VUT/VUE 200 V(B) EC
VUT/VUE 250 V(B) EC
VUT/VUE 200 V EC
VUT/VUE 250 V EC
VUT/VUE 200 V(B) EC
VUT/VUE 250 V(B) EC
VUT/VUE 200 V(B) EC
VUT/VUE 250 V(B) EC
INTAKE AIR SUPPLY AIR EXTRACT AIR EXHAUST AIR INTAKE AIR SUPPLY AIR EXTRACT AIR EXHAUST AIR INTAKE AIR SUPPLY AIR EXTRACT AIR EXHAUST AIR INTAKE AIR SUPPLY AIR EXTRACT AIR EXHAUST AIR
MOUNTING AND SET-UP
THE UNIT MUST BE MOUNTED BY A QUALIFIED EXPERT ONLY, PROPERLY TRAINED AND
HAVING THE REQUIRED TOOLS AND MATERIALS.
HUMIDITY SENSOR MOUNTING IN THE EXTRACT AIR DUCT
ATTENTION!
The humidity sensor must be installed prior to unit mounting.
Mounting steps for the HV1 humidity sensor (for the ventilation units with A11 or A19 control panel):
•
Remove the screws that retain the panel on side of the extract spigot and remove it.
•
Insert the humidity sensor on the mount.
•
Connect the humidity sensor contact socket to the contact socket with a cable from the control unit. The contact socket is pre-
wired.