manualshive.com logo in svg

Vents VUE 200 B EC, Руководство пользователя, Страница: 6 / 20

Поделиться
Скачать
Vents VUE 200 B EC Скачать руководство пользователя страница 6

www.ventilation-system.com

6

 

UNIT DESIGN AND FUNCTIONING

VUT/VUE 200 V(B) EC

A14 control panel 

Supply fan 

HV1 or HV2 humidity sensor

(to be installed upon customer request).

The HV1 humidity sensor is applicable for the control unit A11 or A19.

The HV2 humidity sensor is applicable for the control unit A14).

Bypass damper

(VUT/VUE VB EC)

Supply air filter 

Control unit 

Counter-flow heat exchanger

Drain pan 

Drain pipe 

Extract air filter 

Freeze protection temperature sensor

Power cable with plug 

Removable plates for

 filter maintenance

A11 or A19 control panel 

Extract fan 

VUT/VUE 250 V(B) EC

Supply fan 

HV1 or HV2 humidity sensor

(to be installed upon customer request).

The HV1 humidity sensor is applicable for the control unit A11 or A19.

The HV2 humidity sensor is applicable for the control unit A14).

Extract fan 

Bypass damper

(VUT/VUE VB EC)

Supply air filter 

Internal control unit 

Terminal box 

Freeze protection temperature sensor

Drain pan 

Drain pipe 

Extract air filter 

Supply air filter 

Counter-flow heat exchanger 

Removable plates for

 filter maintenance

A14 control panel 

Power cable with plug 

A11 or A19 control panel 

  The unit casing is made of rigidly fixed panels. The panels are made of painted steel sheet and galvanized steel sheet, filled with heat- 

and sound-insulating layer of mineral wool between.

  The front panel of the unit has removable plates to enable filter replacement. 

  Location of the service side may be changed. 

  The temperature difference between the supply and extract air flow temperature leads to condensate generation inside of the unit. 

Condensate is collected in the drain pan and is removed outside through the drain pipe.

  The energy recovery modification of the unit requires no condensate drain. 

  Connection of the unit to power supply and connection of any control devices to the unit is performed in the control unit and/or in 

the terminal box, depending on the specific unit model. 

  The unit is operated via the control panel and the software. The operation settings are editable through the software. The socket 

connector USB on the unit casing enables connection of the unit to a PC or notebook. The software is available for download at our 

website: http://vents.ua/images/cat/812_2902_cat_file.rar.

Содержание VUE 200 B EC





















Отзывы:

Нет отзывов