www.ventilation-system.com
7
MOUNTING AND SET-UP
INSTALLATION SHALL ONLY BE PERFORMED BY A PROFESSIONAL ELECTRICIAN
QUALIFIED FOR UNASSISTED OPERATIONS WITH ELECTRICAL INSTALLATIONS AND
POSSESSING THE REQUIRED TOOLS AND MATERIALS.
FULFIL THE USER’S MANUAL REQUIREMENTS AS WELL AS THE PROVISIONS OF ALL
THE APPLICABLE LOCAL AND NATIONAL CONSTRUCTION, ELECTRICAL AND TECHNICAL
NORMS AND STANDARDS.
THE HEATER MUST BE GROUNDED!
THE INSTALLATION PLACE MUST PROVIDE SUFFICIENT SERVICE ACCESS.
Air duct connection to the heater
The heater is designed for inline mounting in the air duct both
horizontally and vertically.
Heater connection to the air handling unit
Connect the heater and the air handling unit using the cable
with DB-9M connectors through DB-9F external connectors.
The external connector of the heater must be connected
to the external connector of the air handling unit prior to
connection of the heater and the unit to power mains!
ВIn case of horizontal mounting position the control box cover
must be directed upwards only.
The maximum deviation angle is 90°.
The control box cover may not be positioned downwards!
V115EN-01.indd 7
16.09.2015 12:01:55