Vento Phantom R4i, Руководство по техническому обслуживанию

Страница: 29 / 88

VENTO MOTORCYCLES
Rev no.01/ page 29of 84
1. Cylinder head cover fixing bolt 10~12N·M
2. Chain Tensioner bolt and fixing bolt 10~12 N·M
3. Cam shaft holder nut 22~25 N·M
4. Inlet pipe locknut 10~12 N·M
5. Timing bolt 10~12 N·M
CAM SHAFT HOLDER ASSEMBLY
D I S A S S E M B LY A S S E M B LY
CAM SHAFT HOLDER & CAM SHAFT ASSY. ATMOLYSIS SHAFT RIGHT BEARING 12
CAM SHAFT HOLDER ADJUSTING GASKET 16
ROCKER SHAFT 2
AUTO REDUCTOR OUT CIRCLE 14 AND ROLLING
POLE,SPRING 15
GASKET 3 AND ROCKER 4 ATMOLYSIS SHAFT AND LEFT BEARING 13
STOPPER BOARD 5 ATMOLYSIS SHAFT SPROCKET ASSY. 11
AXIS 6 AND BUSH 7 ATMOLYSIS SHAFT ASSY.
MASS 8 AND SPRING 9 ATMOLYSIS SHAFT SUPPORTER 10
CAM SHAF HOLDER 10 AXES 6 BUSH 7 MASS 8 AND SPING 9
CAM SHAFT ASSY. STOPPER BOARD 5
CAM SHAFT SPROCKET11 ROCKER 4 AND GASKET 3
CAM SHAFT RIGHT BEARING 12 CAM SHAFT LEFT BEARING R
OCKER SHAFT(2)
AUTO REDUCTOR OUTSIDE CIRCLE 14 BEARING, 13
ATMOLYSIS SHAFT FIXER ASSY.
GASKET 16 AND CAM SHAFT 17
ATMOLYSIS SHAFT FIXER AND ATMOLYSIS SHAFT
NOTE : When installing rocker shaft, remember to assemble rocker with lubrication, and
keep groove of center rocker shaft on the same level as the hole of rocker seat.