20. Do not operate any heater with a damaged cord or after the
heater malfunctions, has been dropped or damaged in any
manner. Disconnect power at service panel and have heater
inspected by a reputable electrician before reusing. If the
supply cord is damaged in any way, it must be replaced by the
manufacturer or its service agent or a similarly qualified person
in order to avoid a hazard.
21. Do not run cord under carpet. Do not cover cord with throw
rugs, runners, or similar coverings. Do not route cord under
furniture or appliances. Arrange cord away from traffic area
and where it will not be tripped over.
22. To disconnect heater, turn controls to off, then disconnect from
the supply.
23. To prevent overheating of this appliance, keep the air inlets
and outlets clean and free of anything that may cause
blockage. Check all inlets and outlets from time to time to
ensure it is clear of any dirt or dust accumulation. DO NOT
COVER.
24. Do not use it in areas where gasoline, paint, or flammable
liquids are used or stored.
25. Parts of the heater may exceed 200
Ԩ
, contact with the heating
tube, reflector, or metal parts near the heating tube, may
cause severe burns. To avoid burns, do not let bare skin touch
hot surfaces.
26. NEVER place hands under the heating elements. ALWAYS
allow heating element to cool at least 10 minutes before
touching the heating tube or adjacent parts.
27. This product contains recyclable materials. Do not dispose
this product as unsorted municipal waste. Please contact your
local municipality for the nearest collection point.
28. The fireguard of this heater is intended to prevent direct
access to heating elements and must be in place when the
heater is in use.
29. The heater guard does not give full protection for young
children and infirm persons.
