background image

The controls are located on the top of the heater. The heater is fitted with an adjustable electronic 

controller consisting of a display screen and six touch sensitive buttons.

The  heater  is  fitted  with  an  adjustable  thermostat  enabling  the  room  temperature  to  be 

controlled. The minimum room temperature is 7

o

C. The maximum temperature is set to 26

o

by default, however, this can be increased to 32

o

C if required. A temperature of 21

o

C would be 

comfortable for most people.

Note:

 Your heater may produce some noise during operation. This noise is caused by the 

expansion and contraction of the element as it changes temperature, and is normal for this 

type of product. Whilst the noise produced is usually very quiet, certain environmental factors 

can make it more noticeable, such as hard flooring or minimal furnishings.

Note:

 Should the heater fail to operate, this may be due to the room temperature being higher 

than the thermostat setting.

Connectivity

Sound

Open Window

Adaptive Start

Manual Mode

Advance

Set Time & Date

Frost Protect

Schedule

8

9

7

6

3

2

1

4 5

1

 Indicator “ON”

2

 Display Screen

3

 Days of the Week

4

 Indicator “OFF”

5

 Back Button

6

 Menu Button

7

 Advance Button

8

 Up & Down

9

 Enter

9

Содержание Optimax Plus VAPH100TE





























Отзывы: