Vent-Axia Centra Lo-Carbon SELV HT Скачать руководство пользователя страница 3

 

3

Installation and Wiring Instructions for the Centra Lo-Carbon SELV Range of 
Extractor Fans. 

 

  IMPORTANT: 
  READ THESE INSTRUCTIONS 
  BEFORE COMMENCING THE  
  INSTALLATION 

 
DO NOT install this product in areas where the following may be present or occur: 

  Excessive oil or a grease laden atmosphere. 

  Corrosive or flammable gases, liquids or vapours. 

• 

Ambient temperatures higher than 40°C or less than –5°C. 

• 

Possible obstructions which would hinder the access or removal of the Fan. 

 

SAFETY AND GUIDANCE NOTES 

A. 

All wiring to be in accordance with the current I.E.E. Regulations, or the appropriate 
standards of your country and 

MUST 

be installed by a suitably qualified person. 

B. 

The Fan should be provided with a local isolator switch capable of disconnecting all poles, 
having a contact separation of at least 3mm. 

C. 

Ensure that the mains supply (Voltage, Frequency, and Phase) complies with the rating 
label. 

D. 

The Fan should only be used in conjunction with the appropriate Vent-Axia products. 

E. 

The fan should only be used in conjunction with fixed wiring. 

F. 

When the Fan is used to remove air from a room containing a fuel-burning appliance, 
ensure that the air replacement is adequate for both the fan and the fuel-burning appliance. 

G. 

 The Fan should not be used where it is liable to be subject to direct water spray for 

prolonged periods of time. 

H. 

Where ducted Fans are used to handle moisture-laden air, a condensation trap should be 
fitted. Horizontal ducts should be arranged to slope slightly downwards away from the Fan. 

I. 

This appliance is not intended for use by persons (including children) with reduced physical, 
sensory or mental capabilities, or lack of experience and knowledge, unless they have been 
given supervision or instruction concerning use of the appliance by a person responsible for 
their safety. 

J. 

Young children should be supervised to ensure that they do not play with the appliance. 

K. 

The 

exterior 

grille should be at least 2.3m above the ground to prevent people from being 

able to access moving parts.  If the 

external

 grille is positioned between 0-2.3m from the 

ground,   Please use the Vent-Axia wall kit as detailed below to ensure people cannot 
access the fans impeller from the outside. 

 

IMPORTANT:- ONLY CONNECT TOGETHER PRODUCTS FROM THE CENTRA LO-
CARBON SELV RANGE SINCE THE FANS ARE SPECIALLY DESIGNED TO WORK 
ON 12V DC AND ARE NOT COMPATIBLE WITH OTHER VENT-AXIA 
CONTROLLERS. DO NOT CONNECT MORE THAN ONE FAN TO THE 
CONTROLLER. 

 

DESCRIPTION 

The Centra Lo-Carbon SELV 100mm fan is a continuously running extract fan for 
kitchens, utility rooms, bathrooms and toilets.  
Long life ball bearing DC motor with anti-vibration mounts provides low noise 
transmission into plasterboard/panels for silent operation.   
The fan can be wall, window or panel/ceiling mounted.  

Содержание Centra Lo-Carbon SELV HT













Отзывы: