Venstar T4700, Руководство пользователя и инструкции по установке

Страница: 12 / 47

7
Quick Start
Selecting your desired temperature
AUTO-CHANGEOVER MODE - Pressing the WARMER or COOLER
buttons in Auto mode will adjust both the heat and cool setpoints
simultaneously. To adjust heat and cool setpoints individually, choose
HEAT mode to adjust the heat setpoint and COOL mode to adjust the
cool setpoint, then return to AUTO mode.
HEAT OR COOL MODE - Pressing the WARMER or COOLER buttons
in Heat or Cool mode will adjust only the heat or cool setpoints
individually displayed.
Using the Fan Button
Fan On indicates constant fan operation. Fan On is not allowed
when the thermostat is in the OFF mode. Pressing the FAN button
toggles this feature on or off. Fan auto will allow the fan to run only
when there is a heat or cool demand.
Using the Override Button
UNOCCUPIED OPERATION -
During a Dry Contact forced unoccupied period, pressing the OVERRIDE
button will temporarily force the thermostat into the mode it was in before
the Dry Contact forced it into the Unoccupied mode. For example: If the
thermostat was in the Auto mode and the Dry Contact forced the thermostat
into the Unoccupied mode, then pressing the OVERRIDE button will force the
thermostat back into the Auto mode.
The remaining override time will be displayed in the upper left hand corner
of the display. The override timer can be set up to a maximum of four (4:00)
hours, in increments of 30 minutes. If the timer has been set for the maximum
time, the next press of the OVERRIDE button will reset the timer, returning the
thermostat to the Unoccupied mode.
To adjust the setpoints for the Unoccupied mode, see page 29.
Current Override Hours (Setup step 10) - This counter keeps track of the
number of hours that the thermostat is overridden into Occupied settings.
Press FAN to reset.
FAN ON
AUTO
OUTDOOR
ACCSRY
HUMIDITY
OVERRIDE