Venstar EXPLORER RESIDENTIAL T3950-IAQ, Руководство пользователя и инструкции по установке

Страница: 13 / 52

9
Setup Steps
Turning the schedule ON/OFF
Press/release OFF | RUN HOLD TO SET to change between
PROGRAM ON and PROG OFF.
If you are unable to select PROGRAM ON, setup step #1 is most likely set for
NON-PROGRAM (non-programmable).
Programming a Schedule
Press/hold OFF | RUN HOLD TO SET until you see SET PROGRAM, followed
by some brief instructions.
Press the MODE button to start entering a schedule.
Press the WARMER or COOLER buttons to make changes.
Press the MODE button to advance to the next step.
OFF
RUN
HOLD TO SET
OFF
|
RUN
HOLD TO SET
Setting the Clock and Day
Not available when connected to the Skyport server
Press the SET CLOCK button. Adjust the clock using the WARMER or
COOLER buttons. Press MODE to advance to the day setting. Adjust the
day using the WARMER or COOLER buttons. Press the SET CLOCK button
to confirm settings.
TIP: To adjust the time by hours press and hold the FAN button while
pressing the WARMER or COOLER buttons.
WARMER
COOLER
MODE
Set
Clock