venotec Abyzz A200, Руководство по эксплуатации

Страница: 11 / 40

!
Installation of driver
Assembly:
Modelle A200 / A200 AS / A400
The product must not be installed outside. The mounting wall must be dry and
protected from splashes of water and damp. A suitable power outlet should be
available at an appropriate distance.
Modelle IPX 200 und IPX 400
The driver may be mounted outside or in wet surroundings. Please use the drill
template and the mounting set for wall mounting.
Wiring:
When laying the wires, make sure that no drips of water can reach the electronics
via the wires.
Please note that due to the driver switch-on current, you must not switch on
multiple drivers on the same fuse at the same time. Do not use multi-socket strips
and do not exceed the permitted connected load of your supply line under any
circumstances.
Ambient temperatur and cooling:
The product can be used at ambient temperatures of between 2°C and +40°C.
To ensure sufficient cooling, the driver should be at least 20
cm away from any other objects (walls, ceilings, cable
ducts, pipes etc.). The cooling element must not be
covered. We recommend that you do not expose the driver
to any additional heat source (heating system, lighting,
sunlight) and ensure sufficient ventilation if using it in
cupboards or on racks..
! 11