- 10 -
9. OPERATION
The hood is operated using the push button on the front panel.
The light switch turns the lamps on and off.
The blower switches turn the blower on to three speed settings:
LOW SPEED
MEDIUM SPEED
HIGH SPEED
HC00
3
6
OFF
LOW
MED.
HIGH
ON/OFF
FAN CONTROLS
LIGHTS
Grease Filter
Grease filter should be cleaned monthly. Remove grease filter by pulling down on its metal latch tab. This will disengage the filter from the
hood. Tilt the filter downward and remove. Use a warm detergent solution to clean the filter. Let it dry completely before reinstalling it.
Grease filter is dishwasher safe. Clean all-metal filter in the dishwasher using a non-phosphate detergent. Discoloration of the filter may
occur if using phosphate detergent or as a result of local water conditions — but this will not affect filter performance. This
discoloration is not covered by the warranty.
Hood Cleaning
Stainless steel cleaning: How to maintain its “BRIGHT LOOK” and help prevent corrosion.
Dos:
-
Regularly wash surfaces with clean cloth or rag soaked with warm water and mild soap or liquid dish detergent.
-
Always clean in the direction of original polish lines.
-
Always rinse well with clear water (2 or 3 times) after cleaning. Wipe dry completely.
-
You may also use a specialized household stainless steel cleaner.
Don’ts:
-
Use any steel or stainless steel wool or any other scrapers to remove stubborn dirt.
-
Use any harsh or abrasive cleansers.
-
Allow dirt to accumulate.
-
Let plaster dust or any other construction residues reach the hood. During construction or renovation, cover the hood to make sure
no dust sticks to stainless steel surface.
Avoid when choosing a detergent:
-
Any cleaners that contain
bleach
will attack stainless steel.
-
Any products containing :
chloride
,
fluoride
,
iodide
,
bromide
will deteriorate surfaces rapidly.
-
Any
combustible products
used for cleaning such as
acetone
,
alcohol
,
ether
,
benzol
, etc., are highly explosive and should never
be used close to a range.
10.CARE
WARNING
Before servicing or cleaning the unit, switch power off at service panel and lock service panel to prevent power
from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a
prominent warning device, such as a tag, to the service panel.
!
