Venmar Signature S1 Series, Инструкция по установке и руководство пользователя

Страница: 7 / 12

- 7 -
10. USE AND CARE
Filters and impeller
The filters, impeller and the intake ring should be
cleaned frequently. Use a warm detergent solution.
The intake ring and impeller are dishwasher safe.
To remove the impeller, first take off the intake ring.
Then remove the impeller by pulling it down smoothly.
There is a tab on the interior ring of the wheel, make
sure it fits into one of the holes on the motor (you will
feel it fall into position), when reinstalling the wheel.
WARNING
We take great care to keep sharp edges to a minimum, but please
be careful; the hood cover edges may be sharp.
1 0
!
Hood cleaning
Stainless steel cleaning: How to maintain its « BRIGHT LOOK »
Do:
- Regularly wash surfaces with clean cloth or rag soaked with warm water and mild
soap or liquid dishwashing detergent.
- Always clean in the direction of original polish lines.
- Always rinse well with clear water (2 or 3 times) after cleaning. Wipe dry completely.
- You may also use a specialized household stainless steel cleaner.
Don’t:
- Do not use any steel or stainless steel wool or any other scrapers to remove
stubborn dirt.
- Do not use any harsh or abrasive cleansers.
- Do not allow dirt to accumulate.
- Do not let plaster dust or any other construction residues reach the hood. During
construction or renovation, cover the hood to make sure no dust sticks to stainless
steel surface.
Avoid: when choosing a detergent
- Any cleaners that contain bleach will attack stainless steel.
- Any products containing : chloride , fluoride , iodide or bromide will deteriorate
surfaces rapidly.
- Any combustible products used for cleaning such as acetone , alcohol , ether ,
benzol , etc., are highly explosive and should not be used close to a range.
Enamel finish:
Clean with warm water and mild detergent only. If discoloration occurs, use a good
enamel polish such as automotive polish. (
DO NOT use rough abrasive cleaner or
porcelain cleaner.)
HD0037