8
7. GREASE
FILTERS
1. To remove the grease filters, pull down on the metal latch tab and tilt
each filter downward to remove.
2. To install the grease filters, align rear filter tabs with slots in the hood.
Pull down the metal latch tab, push each filter into position and release.
Make sure filters are securely engaged after installation.
8. LIGHT
BULBS
This range hood requires four UL approved halogen bulbs (Type JC, 12 V,
20 W maximum, G-4 Base) (included).
To replace bulbs:
1. Gently push the rim upward and turn counterclockwise to disengage
the light bulb cover.
2. Replace with Type JC, 12 V, 20 W maximum, G-4 Base halogen bulb.
3. Replace the light bulb cover by pushing the rim upward and rotating the
light bulb cover clockwise.
WARNING
!
In order to prevent the risk of personal injury, the halogen lamps must cool down before removing them.
CAUTION
Do not touch replacement bulb with bare hands!
9. OPERATION
Lamp
Power
Speed
HC0048
Timer
1
2
3
4
1) Time/Delay push button
3) Blower push button
2) Lighting push button
4) ON/OFF push button
HD0357
HD0358
L
IGHT
BULBS
COVERS
Always turn your hood on before you begin cooking to establish an air flow in the kitchen. Let the blower run for a few minutes to clear the
air after you turn off the range. This will help keep the whole kitchen cleaner and brighter.
