background image

16

15. WARRANTY

VENMAR VENTILATION FIVE-YEAR WARRANTY

Venmar Ventilation ULC warrants to the original consumer purchaser of the Venmar Ispira IU600ES 
Series range hood that such product will be free from defects in materials or workmanship for a 
period of five (5) years from date of original purchase, except the LED modules and LED driver, 
which are covered for a period of three (3) years. This warranty includes in-home service for the 
first year and workshop service for the four (4) remaining years.

THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT 
NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A 
PARTICULAR PURPOSE. VENMAR VENTILATION ULC WILL NOT BE HELD RESPONSIBLE 
FOR ANY CLAIMS OVER THE ORIGINAL PURCHASE PRICE OF A VENMAR ISPIRA IU600ES 
SERIES RANGE HOOD NOR HELD RESPONSIBLE FOR SUBSEQUENT DAMAGE OR 
INCIDENT.

During the period stated above, Venmar Ventilation ULC will, at its option, repair or replace without 
charge any product or part which is found to be defective under normal use and service. THIS 
WARRANTY DOES NOT EXTEND TO FUSE, FILTERS, DUCTS, ROOF CAPS, WALL CAPS 
AND OTHER ACCESSORIES FOR DUCTING.

This warranty does not cover a) normal maintenance and service b) any products or parts 
which have been subject to misuse, negligence, accident, improper maintenance or repairs 
made by other than Venmar Ventilation ULC, or c) a faulty installation or installation contrary to 
recommended installation instructions.

Warranty service is to be completed by an authorized Service Center designated by Venmar 
Ventilation ULC. Where applicable, in-home service will be made available only in areas where a 
contracted service provider offers service. If in-home service is not available, the product will be 
repaired or replaced, at Venmar Ventilation ULC’s discretion, by the nearest authorized service 
provider. The unit removal and reinstallation works are under the customer responsibility, and 
Venmar Ventilation ULC cannot be charged for them.

The duration of any implied warranty is limited to the 5-year period as specified for the express 
warranty. Some provinces do not allow limitation on how long an implied warranty lasts, so the 
above limitation may not apply to you.

VENMAR VENTILATION ULC'S OBLIGATION TO REPAIR OR REPLACE AT VENMAR 
VENTILATION ULC'S OPTION, SHALL BE THE PURCHASER'S SOLE AND EXCLUSIVE 
REMEDY UNDER THIS WARRANTY. VENMAR VENTILATION ULC SHALL NOT BE LIABLE 
FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES ARISING OUT OF OR IN 
CONNECTION WITH PRODUCT USE OR PERFORMANCE. SOME PROVINCES DO NOT 
ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, 
SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

This warranty gives you specific legal rights and you may also have other rights, which vary from 
province to another. This warranty supersedes all prior warranties.

To contact Venmar Ventilation ULC warranty service, call 1-800-567-3855 in Canada. In order 
to qualify for a warranty claim, the owner of a Venmar Ispira IU600ES Series range hood must 
have the model and serial number along with a proof of the original purchase date. At the time of 
requesting service, describe the nature of any defect in the product or part.

Venmar Ventilation ULC, 550 Lemire Blvd., Drummondville, QC  J2C 7W9   (1-800-567-3855)

www.venmar.ca 

Содержание ISPIRA IU600ES SERIES

















Отзывы: