Venga VG M 3015, Руководство пользователя, Страница: 16 / 96

VG M 3015 16
4. 1. Fit the meat tray (9) onto the meat
grinder body(8) so that the wide part is
positioned over the motor house of the
appliance.
2. Place the mixing bowl (26) or similar
under the meat grinder body opening.
3. The appliance is now ready for use.
5. 1. Plug the power cord into the main
power outlet and switch it ON.
2. Turn the speed control knob to speed
1(or any speed setting). The indicator
light on the control panel will now be
on.
3. Cut your meat into smaller pieces, so
they fit into the feeding tube. Dice or
cut into strips approx. 2.5 cm wide.
4. Put the pieces onto the tray(9).
5. Select the desired speed using the four
speed buttons. Recommended speeds
are shown in the table above.
The meat pieces travel down the feeding
tube. Push down carefully with the tamper
(10). Do not press too hard, otherwise you
may damage the appliance.
6. 1. Stop the appliance by turning the knob
to O when you have finished grinding
the meat. Switch off the appliance
using the switch and unplug it before
you change the accessories, take the
appliance apart or when not in use.
2. Remove the pusher and the meat tray.
7.
To detach the meat grinder, turn the body
so the arrow is aligned with the circle and
then remove it.