Venga SWM 3000, Инструкция по эксплуатации, Страница: 3 / 132

damaged, or come into contact with water. Return the
machine to the nearest authorized retailer or service center
for examination, repair, or electrical or mechanical
adjustment.
❑
Never operate the machine with any air openings blocked.
Keep ventilation openings of the sewing machine and foot
controller free from accumulation of lint, dust and loose
fabrics.
❑
Keep fingers away from all moving parts. Special care is
required around the sewing machine needle.
❑
Always use the correct needle plate. The wrong plate can
cause the needle to break.
❑
Do not use bent needles.
❑
Do not pull or push the fabric while stitching, as this may
deflect the needle, causing it to break.
❑
Switch the sewing machine off when making any adjustments
in the needle area, such as threading the needle, changing
the needle, threading the bobbin, changing the presser foot,
etc.
❑
Always unplug the sewing machine from the electrical outlet
when replacing accessories, removing covers, or when
making any other user servicing adjustments mentioned in
the instruction manual.
❑
Never drop or insert any object into any opening.
❑
Do not use outdoors.
❑
Do not operate where aerosol spray products are being used
or where oxygen is being administered.
❑
To disconnect, turn all controls to the Off position, then
remove the plug from the electrical outlet.
❑
Do not unplug by pulling on the cord. To unplug, grasp the
plug, not the cord.
❑
The sound pressure level under normal operation conditions
is 72db.
❑
Turn off or unplug the machine when if you suspect the
appliance is not operating properly.