Veneco Medium Comfort Скачать руководство пользователя страница 4

User's man

ual Medium Comf

or

t

4

1.  SaFETy REqUIREMENTS

-  Read and understand the users'manual before operating and mounting the air handling unit with heat recovery, hereinafter 

referred as the unit.

-  While mounting and operating the unit consider the requirements of the present user's manual as well as requirements of all 

applicable local and national building and electrical codes and standards.

-  Read carefully the warnings contained in the manual to make yourself aware of the safety rules!
-  Non-compliance with the rules and warnings stated in the user's manual may result in a personal injury or the unit damage.
-  Read the user's manual carefully and keep it as long as you use the product.
-  In case of transferring operation of the unit to another person provide the user manual..

Symbol designation used in the manual:

MOUNTING SaFTEy PRECaUTIONS

Disconnect the unit from 

power supply before mounting 

and repair operations.

The unit must be grounded!

Do not operate the unit

 beyond the specified 

temperature range. 

Do not use damaged electric 

equipment and conductors for 

electric connections.

Follow all applicable electrical 

safety rules while operating and 

mounting the unit.

Unpack the unit carefully.

Unauthorized power cable 

length modification is not 

allowed

Keep heating and other 

devices away from the unit 

power cable.

WARNING !

DO NOT !

Содержание Medium Comfort

















Отзывы: