User's man
ual Medium Comf
or
t
12
Wall
Fasteners
Unit
Round air duct
sloped down by 2-3°
Outer ventilation hood
Round air duct
sloped down by 2-3°
SENSOR SPEED SWITCH MOUNTING
Mounting sequence of the sensor speed switch:
Unfasten gently the switch front panel latches.
Remove the front panel.
Route the cable in the wall to the speed switch installation site.
attach the back panel to the wall through the fastening openings.
Connect the control cable to the speed switch following the wiring diagram, page 13.
Install the front panel on the latches.
MAKE SURE THAT THE SWITCH IS NOT DAMAGED. DO NOT OPERATE A
DAMAGED SWITCH! DO NOT INSTALL THE SWITCH ON AN UNEVEN SURFACE!
DO NOT APPLY EXCESSIVE FORCES WHILE TIGHTENING THE SCREWS TO
AVOID THE SPEED SWITCH CASING DEFORMATION.
