7
STEP 5.
Thread one ST5x40 wood screw (3) through the bracket, into the pilot hole, and
into the
stud
. Partially tighten. Make sure the bracket is level. Thread the remaining three ST5x40 wood
screws into the other three holes. Check the alignment and tighten each screw securely with the
Phillips screwdriver. Check each screw to make sure it is tight, and that the bracket is secure.
STEP 6.
If only one wall stud is available, the wall mount bracket must be secured to the wall with
two ST5x40 wood screws (3) though the two center post holes
AND four ST4x30 drywall
screws (4)
through one other set of bracket holes.
DO NOT
attach the wall mount bracket to the
wall studs with one of the outer sets of holes as the bracket will not be stable. Use the center holes.
3
3
3
3
4
4
4
4
3
3
3
3
Meijer.com
