6
STEP 3.
Locate the wall studs using an electronic stud-finder. Studs are spaced 16” apart as
measured from the center of each stud. The holes in the mounting bracket (C) will align with the
wall studs. The end of each arm has a hole. There are also two holes on the center post.
AVOID INJURY and DAMAGE! Four screws
should be screwed
directly into wall
studs
. If that is not possible,
at least two screws
must be screwed directly into wall
studs,
AND
four additional screws
must also be screwed into the drywall anchors
.
STEP 4.
Position the wall mount bracket (C) over the wall studs. Level the mounting bracket and
mark the four holes with a pencil. Set the wall mount bracket aside. Drill a pilot hole at each marked
point using a 1/16” wood drill bit. Make sure each hole goes into a wall stud.
16”
16”
Studs
Drywall
Hook
Tab
C
16”
16”
Note: The wall mount bracket
tabs are on the lower arms and
the hooks are on the upper arms.
C
Hook
Tab
Meijer.com
