Instructions for programming SVE01 Board
functions
28
© SandenVendo Europe SpA
18 MDB Multi vend
NO = Multiple Sale disabled (the rest is paid automatically after selection) [default]
YES = Multiple Sale enabled (the rest is retained for a subsequent selection, if you
want instead of the rest of the provision is necessary to press the button changer)
19 MDB Bill Escrow mode
This allows you to give as rest also banknotes. If enabled and the last banknote
increases the credit over the maximum price, the bank note is not inserted in the
counter, but remains available to be rendered as change. If the function is disabled,
the banknotes go in the counter.
20 MDB Credit timeout
This parameter determines the management of remaining credit:
YES = Deletes the remaining balance if you do not press any button for 5 minutes
[default]
NO = Keeps the credit for an indefinite period
27 Decimal point
This parameter controls the decimal position for visualizing the credit on the display
0 = No decimal
:
100
1 = Decimal 1 position
:
10.0
2 = Decimal 2 position
:
1.00 [standard position]
28 MDB Cashless credit display
YES = The credit is shown on the display
NO = The credit isn’t shown on the display during vend cycle.
29 MDB Cashless sale management
Currently not used, reserved for future implementations.
30 MDB Bill Revalue mode
If this parameter is enabled the bill are accepted only to recharge the key, when the
key mode is activated.
4.10.6 ~ 06 Time Setting
Within this menu you can set the time.
Press
to enter, with button
and
choose between Year, Month, Date,
Hour and Minutes.
Use buttons
and
to set the new values.
Confirm with button
or exit without changing using button
.
11.6 Tecnician Menu
05 Payment Setting
06 Time settings
07 Load file from USB
11 General Menu
10 Test
11 Technician menu
12 EVA Counters
1
4
3
2
3
2
4
