VendNet 3532M, Руководство по обслуживанию

Страница: 5 / 38

COMBI VENDOR • 3532
| 3
UNPACKING
This vending machine was thoroughly inspected before leaving the factory and
the delivering carrier has accepted this vendor as their responsibility. Note any
damage or irregularities at the time of delivery and report them to the carrier.
Request a written inspection report from the claims inspector to file any claim for
damage. File the claim with the carrier (not the manufacturer) within 15 days
after receipt of the vending machine.
Carefully remove the outside packing material so as not to damage the finish or
exterior of the vending machine. Inspect the vending machine for concealed
shipping damage. Report any damage hidden by the shipping material directly to
the delivering carrier on a hidden damage report.
Record the model number and serial number of the vendor for your records.
These numbers can be found on the Serial Plate on the rear of the cabinet
and/or inside the vendor. Refer to these numbers on all correspondence and
inquiries pertaining to this vendor.
Remove the shipping skids by placing a 2x6 under the vendor, inserting a large
screwdriver or prying tool into the grove and splitting it in two. Turn the leveling
screws in as far as possible. See Figure 3a.
Figure 3a. Remove Shipping Skids
INSTALLATION
•
Consult local, state and federal codes and regulations before installing the vendor.
•
Retrieve the keys to the vendor from the coin return cup.
•
Open outer door and remove all internal packing material.