Page 17
CHANGING THE BATTERY:
Remove the battery cover on the back of the lock with a screwdriver.
Remove the battery from compartment and replace it with 1 new 3V Lithium
CR 2450 button battery.
If the battery is about to run out, the red light starts to flash immediately after
the on/off operation. After this warning, the lock can be opened and closed
100-150 times.
BATTERY FAILURE OVERRIDE: (If the lock installed to locker)
Remove the caps from the holes of Red and Green leds, insert the pins
of the miniK10 Power Adapter into these holes and press. When the lock
wakes up, enter your password and unlock it.
ATTENTION!
In case of any failure, inform the vendor in writing of the detailed description
of the failure. In case of any intervention in the device, such as attempting to
repair the device, the device gets OUT OF WARRANTY.
LIMITED WARRANTY:
VEMUS Ltd. offers a one year limited warranty all products to be free from
manufacturing defects in materials and workmanship. This warranty does
not cover the battery, lost combinations or damages caused by improper
mounting, improper or unreasonable use.
LIABILITY LIMITS:
This is a limited warranty and is in lieu of all other warranties (including
the implied warranties of merchantability and fitness for use) and under no
circumstances shall VEMUS be liable for any incidental or consequential
damages or losses.
CAMS:
-
Two cams are included
-
Cams can be placed at
increments of 90 degrees
-
The Stop Cam (#3) in installation
instructions can be positioned for
turning the cam clockwise or counter-
clockwise
Cam
Placement
7/8” Straight Cam
22mm
1-1/2” Straight Cam
38mm
