Vemer memo BUS Скачать руководство пользователя страница 6

Страница: 6 / 68

gli

- 4 -

User manual memo BUS

SAFETY WARNINGS

During product installation and operation it is necessary

to observe the following instructions:

1) The instrument must be installed by a qualified person,

strictly in observance of the connection diagrams shown

in this manual.

2) After installation inaccessibility to the terminals without

using dedicated tools must be guaranteed.

3) Before accessing the connection terminals, make sure

that the leads are not live.

4) Do not connect or feed the instrument if any part of it is

damaged.

5) The product must be installed and activated in com-

pliance with current electric systems standards.

6) Do not use the instrument for anything other than the

indicated purpose.

7) I n the electrical system upstream of the instrument

must be installed a protection device against the

overcurrents

8) The product can be used in environments with

Measurement Category III and Pollution degree 2,

according to the Standard IEC 60730-1

DIMENSIONS

ENG

Содержание memo BUS





































































Результаты поиска

Содержание memo BUS

Отзывы:

Vemer memo BUS, Руководство пользователя, Страница: 6 / 68

Результаты поиска

Содержание memo BUS

Отзывы: