En
gli
sh
- 56 -
User manual memo BUS
GPS MENU
ENG
GPS menu allows you to enable or disable the presence of the additional GEO-1 module.
GEO-1 is a GPS module that allows you to capture the information of date, time and location from satellites and then to transfer them to
memo BUS.
With GEO-1 connected and enabled, memo BUS synchronizes date, time and location (latitude, longitude) every 30 minutes, signaling
synchronization with a flashing symbol (2 times).
In this way the time of memo BUS is always synchronized and are canceled the drifts due to the tolerance of the oscillator which marks the
time base.
To enable the presence of GEO-1:
set
It’s also possible to display the status of the connection to GEO-1 (ok, waiting, error).
From the status page, while by pressing the key for at least 3 seconds it’s possible to force data sending from GEO-1 to memo BUS
(the display shows
).
To disable the presence of GEO-1:
set
If GPS module is not connected, it’s advisable to set
to avoid displaying unnecessary information message
on the
start page of memo BUS (see page 8).
Note: the internal oscillator which marks the time base allows memo BUS to maintain the updated time even without the presence of GEO-1.
In this case clock accuracy is ± 0.5 seconds per day.
Содержание memo BUS
