Vemer memo BUS Скачать руководство пользователя страница 38

Страница: 38 / 68

gli

- 36 -

User manual memo BUS

ENG

Turning on at sunset, turning off at sunrise.

No parameter required.

Off from sunset to sunrise.

No parameter required.

Turning on at sunset, turning off during the

night. Turning on during the night, turning

off at sunrise.

Choose one of the three following cases:

Turning on at sunset, turning off at a

settable time.

Turning on at a settable time, turning off

at sunrise. (*)

Turning on at sunset, turning off after a

settable time interval.

Turning on before sunrise of a settable

time interval, turning off at sunrise.

Turning on at sunset for a settable short

duration (pulse, max 59 seconds).

Turning on at sunrise for a short settable

duration (pulse, max 59 seconds).

Night programs

* If off time is before sunset switching is not carried out. If on

time is after sunrise switching is not carried out.

** Switching on continues for the entire set time interval (also

if off time is after sunrise).

*** Switching on occurs before sunrise of the entire set time

interval (also if on time is before sunset).

Содержание memo BUS





































































Результаты поиска

Содержание memo BUS

Отзывы:

Vemer memo BUS, Руководство пользователя, Страница: 38 / 68

Результаты поиска

Содержание memo BUS

Отзывы: