Vemer Dafne Wi-Fi, Руководство пользователя

Страница: 37 / 56

English
- 35 -
Dafne Wi-Fi Chronothermostat User Manual
Regulation parameters
In case of on/off regulation the only parameter to set is the differential (
G,)
), which
can have values between 0.1°C and 1°C.
In case of proportional regulation the parameters to set are the regulation band (
EQG
)
and the regulation period ( 3(U ).
For further information about how to choose these values see the chapter
“Regulation type” on page 44.
But remember that the preset settings are suitable for the most part of the
situations: change these settings only if it’s really necessary.
Antifreeze temperature (for heating mode only)
For the heating mode it’s possible to set a safety
temperature (antifreeze temperature –
II ) to
maintain also if the chronothermostat is switched
off.
It’s possible to choose a value between 1°C and
50°C. It’s also possible to deactivate the antifreeze
function by pressing the key
until the display
shows “
B
” .
In this case, if the chronothermostat is
switched off, no safety temperature is maintained.
Adjustment of the measured temperature
In particular installation conditions, it can happen that the temperature measured by
the device deviates from the average temperature in the room.
In this case, enter a temperature adjustment value
with keys
and and press key
to confi rm.
Allowed values: -5°C ÷ 5 ° C.
Factory value: 0°C.
Note: the temperature value shown on the display during normal operation includes
any adjustment made.
For further information about how to choose these values see the chapter
“Regulation type” on page 44.
But remember that the preset settings are suitable for the most part of the
situations: change these settings only if it’s really necessary.