- 39 -
User Manual
Athena
English
• This menu, marked by the
symbol, reads the battery level (in percentage).
• When the batteries are running down, the
symbol
appears on the main page too. The device keeps
on performing all functions, although displaying the
reminder that batteries need to be replaced shortly.
WARNING: operation on low batteries does not
guarantee relay switching, wireless transmission or
bus communication.
• When the batteries are removed, the display goes off to curb consumption and enable
battery replacement. All functions except for the clock are discontinued. The device
will keep operating without batteries for approximately 2 minutes.
• As soon as the new batteries are in place, the programmable thermostat will resume
operation with all the previous settings, current time included. Should this not happen,
reset the device as described in the "switch-on reset".
PROGRAMMING ON/OFF
• In this menu, which is marked by the
symbol, it is possible to enable and disable
temperature control for every separate configured zone. All zones are “ON” by default.
• Select the desired zone using arrow keys and , then press
[OK]
to change the
setting. Use arrow keys and to select either “OFF” or “ON” status and press
[OK]
to confirm.
NOTE: when switching from OFF to ON, the device will take on the operation
mode selected prior to the OFF status.
ESC
ESC
ESC
