30 VELUX
SECTION III: SOLAR CONTROL SYSTEM
SECTION III: SOLAR CONTROL SYSTEM
The unit must only be located internally. It is not
suitable for installation in hazardous locations and
should not be exposed to any electromagnetic
field. The controller must additionally be equipped
with an all-polar gap of at least 3 mm or with a
gap according to the valid installaton regulations,
e.g. LS-switches or fuses. Please pay attention to a
separate laying of the cable lines and installation of
ac power supply.
Warning!
Switch-off power supply before opening the housing.
1. Installation
1.1 Mounting
1. Unscrew the cross-recessed screw of the cover
and remove it from the housing.
2. Mark the upper fastening point on the underground
and premount the enclosed dowel and screw.
3. Hang up the housing at the upper fastening
point and mark the lower fastening point on the
underground (hole pitch 130 mm), afterwards put
the lower dowel.
4. Fasten the housing at the underground.
Display
Pushbuttons
Can fuse A4
Cable conduits with
strain relief
Cover
Hanging
Base
130
Fixation
Содержание TFF 200
Страница 16: ......
Страница 26: ...26 VELUX...