Velotric Nomad Series, Быстрый старт

Страница: 8 / 15

12 13
Unscrew the bolts on
the mounting brackets
of the display.
Unscrew the bolt on the
bell mount and install
the bell. Adjust the
angle before tightening
the bolt.
Mount the display panel
onto the handlebar and
adjust it to an angle you
can view easily on the
seat in a riding position.
Tighten the bolts with
the M3 hex key.
1. 1.
2.
Connect the display
cables (marked green
and blue) as shown
below.
Unscrew the bolt on
the reflector mount
and install the reflector.
Adjust the angle before
tightening the bolt.
3. 2. Wrap the display wires
together with the
connected front light
cable with the cable
binder.
Attach the rear
reflector to the seat
post. Adjust the angle
before tightening the
bolt.
4. 3.
Step 7
Display
Bike Assembly
Blue
M3
Green
NOTE
You can position the bell and reflector according to your preference.
!
90°
Ground
Step 8
Bell and Front/Rear Reflector
Bike Assembly