VDOT-ASD-400 Aspiration Detector
Velocity Detection
23
VDOT-ASD-400 Aspirating Smoke Detector User’s Manual V1
The default display item can be changed by pressing and hold <MODE> key for 2 seconds.
Numerical LED
Indicator
Description
SMOKE
In normal operation, indicates the reading on numerical display
is current smoke concentration.
ON
In program mode, indicates current displayed function is smoke
related parameters.
ON
In executing smoke learning function.
Flashing
FLOW
In normal operation, indicates the reading on numerical display
is current airflow percentage.
ON
In program mode, indicates current displayed function is airflow
related parameters.
ON
In executing flow normalization.
Flashing
ADDR
Display the RS485 address of the device.
ON
AUX.
Display code of current event and code.
ON
Display Item
Numerical LED
unit
Remarks
Smoke (S)
0.000~25.00
%/m
Airflow (F)
0~200
%
Address (Addr)
0
~
255
In setting other parameters, all indicators
will go off (except smoke learning or air flow
labeled flashing condition)
Auxiliary (Aux)
NONE
A1~A14
E0~E33
The flashing indicators of smoke learning or air flow labeling will not go off due to switching the
numerical tube in display. example: In air flow labeling stage, the air flow indicator flashes, if
numerical tube switched to display smoke value at this time, the smoke indicator will become
normal ON with air flow indicator in flashing; switch to display the air flow value at this time, the air
flow indicator will flash; in switching to display temperature, the air flow indicator will flash, temp.
Indicator normal ON; the rest may be deduced by analogy, when airflow labeling ended, the air flow
indicator will stop flashing.
o
Beeper
There are the following beeper modes that the beep frequency is different when the device is in
alarm or fault status. Users can change the beeper mode according to their application.