18
4. Press the Match button on
the Transmitter/Mini-Cam while
the Receiver/Viewer's shutter
indicator light is flickering.
5. The signal light of the
Transmitter/Mini-Cam will start
to flicker. When it stops, it
should have successfully matched
with the Receiver/Viewer.
6. To verify that channel matching
is successful, check that the
Receiver/Viewer's channel
number is followed by a series of
curved lines rather than an X. A
maximum of four lines indicates
the strength of the channel signal.
Here's how to match channels:
1. Press the Menu button four
times to display the Match menu
at the bottom of the screen.
2. Press the Set
button to
cycle through the channels.
3. To select the highlighted
channel, fully press the Shutter
button on the Receiver/
Viewer. The shutter indicator
light will flicker, then stop
after a few seconds.