VRC8DP GB
13
SLEEP FUNCTION
The SLEEP function can only switch the device off (POWER off)
after 15, 30, 45 or 60 minutes. When the sleep time has elapsed,
the unit will automatically transmit the power-off code of the
device mentioned on the lower half of the LCD.
SETTING THE SLEEP TIMER
Press the SLEEP button once to activate the sleep timer for 15
minutes. Each additional press will add 15 min. to the timer.
Press the SLEEP button five times to deactivate the sleep timer
and exit the sleep timer mode.
While the time is running : press the SLEEP button once to check
the remaining sleep time. Some units have separate power on &
off buttons. In this case, the user should store the power-off code
on the second page of the power key. The unit automatically
transmits the code on page n°2 if the power key contains more
than one code.
REMARK :
Make sure the selected device is activated and
verify whether the VRC8DP is head-to-head with the
device in question.
OPERATING THE REMOTE CONTROL
NORMAL OPERATION
(1) Select a device button.
(2) Press the appropriate storage button.
The LCD will display "EMPTY" if the storage key does not
contain any data.
OPERATION OF THE SPECIAL MULTI-CODE KEYS
(1) Select a device button.
(2) Press the special multi-code button once to activate the
function in the 1st memory location.
(3) Press again to activate the function in the 2nd location.
Press three times to transmit the data in the 3rd, etc. (max 5
memorised functions).
MACRO OPERATION
(1) Press the MACRO button. The LCD will show "MACRO ?"
and the user has to wait 2 seconds before entering the
desired macro number (0 - 9) or pressing the device button
in question.
The TV will be deactivated
in 15 minutes.
