128-9449
Page 1
Model PE1B
Operators Manual
RF Upgrade Kit
PATENTED: www.voxxintl.com/company/patents
PRESTIGE
Start Button
Press two times in
succession to
start vehicle
To Operate System:
1) Press transmitter button two times in succession to start the vehicle. The vehicle will start and
run the predetermined time set up during installation (5 to 60 minutes selectable).
2) During the run cycle, enter the vehicle using your door key or, if the unlock option is installed,
once you are within range of the vehicle, press and hold the transmitter button for 3 seconds to
unlock the vehicle doors.
3) Enter the vehicle, insert your key and turn it to the run, NOT START, position, then step on the
brake, the vehicle is now in control of the ignition key.
NOTE:
For push to start vehicle systems, simply enter the vehicle with your key in hand, and
step on the brake.
4) With vehicle running, if you wish to make a quick stop and leave the vehicle running, once
you arrive at your destination:
a) place the gear selector in Park,
b) set the parking brake,
c) with your foot off the brake, press the transmitter button two times in succession.
The vehicle will now be under control of the remote start system. Turn your ignition switch off,
WITHOUT, stepping on the brake, and exit the vehicle. Lock the doors with the key to insure
security.
