5
The outputs will be deactivated and the UP or DOWN operation LED of the corresponding channel will blink rapidly to indicate the
learning mode. The LEDs of the learned push buttons will blink rapidly as well. You can easily detect which push buttons have been
learned for the UP or DOWN control. Add a specific push button by maintaining it pressed until the output activates. Releasing the push
button will deactivate the output while the indication LED of the push button blinks rapidly as confirmation. You can not add any more
push buttons when the maximum number of push buttons has been reached. A learned push button can be deleted by maintaining it
pressed. Releasing it will turn off the indication LED of the push button. Delete all learned push buttons of a command by maintaining
pressed the manual control on the blind control module until the output switches on. Releasing the manual control push button will
deactivate the output and turn off the indication LEDs of each corresponding push button.
Repeat the procedure above to learn other commands to the push buttons.
Exit the learning mode by resetting the address of the blind control module at the original value.
When using firmware version 0736 you will be able to delete all push buttons saved for a particular channel into the memory of the blind
control module at once. Set the address to one of the learning addresses. Maintain the manual control on the blind control module pressed
for 10 seconds. The relay will activate and deactivate again after 7 seconds to confirm the push buttons have been erased. Set the address
back to its original value.
Address
Push buttons to learn
F1
Learning push buttons rising shutter 1
E1
Learning push buttons rising shutter 1 immediately and completely
D1
Learning push buttons lowering shutter 1
C1
Learning push buttons lowering shutter 1 immediately and completely
B1
Learning push buttons raising and lowering the blind (as from firmware version 0805)
F2
Learning push buttons rising shutter 2
E2
Learning push buttons rising shutter 2 immediately and completely
D2
Learning push buttons lowering shutter 2
C2
Learning push buttons lowering shutter 2 immediately and completely
B2
Learning push buttons raising and lowering the blind (as from firmware version 0805)
5
The outputs will be deactivated and the UP or DOWN operation LED of the corresponding channel will blink rapidly to indicate the
learning mode. The LEDs of the learned push buttons will blink rapidly as well. You can easily detect which push buttons have been
learned for the UP or DOWN control. Add a specific push button by maintaining it pressed until the output activates. Releasing the push
button will deactivate the output while the indication LED of the push button blinks rapidly as confirmation. You can not add any more
push buttons when the maximum number of push buttons has been reached. A learned push button can be deleted by maintaining it
pressed. Releasing it will turn off the indication LED of the push button. Delete all learned push buttons of a command by maintaining
pressed the manual control on the blind control module until the output switches on. Releasing the manual control push button will
deactivate the output and turn off the indication LEDs of each corresponding push button.
Repeat the procedure above to learn other commands to the push buttons.
Exit the learning mode by resetting the address of the blind control module at the original value.
When using firmware version 0736 you will be able to delete all push buttons saved for a particular channel into the memory of the blind
control module at once. Set the address to one of the learning addresses. Maintain the manual control on the blind control module pressed
for 10 seconds. The relay will activate and deactivate again after 7 seconds to confirm the push buttons have been erased. Set the address
back to its original value.
Address
Push buttons to learn
F1
Learning push buttons rising shutter 1
E1
Learning push buttons rising shutter 1 immediately and completely
D1
Learning push buttons lowering shutter 1
C1
Learning push buttons lowering shutter 1 immediately and completely
B1
Learning push buttons raising and lowering the blind (as from firmware version 0805)
F2
Learning push buttons rising shutter 2
E2
Learning push buttons rising shutter 2 immediately and completely
D2
Learning push buttons lowering shutter 2
C2
Learning push buttons lowering shutter 2 immediately and completely
B2
Learning push buttons raising and lowering the blind (as from firmware version 0805)
