PI150S GB
3
BAD
GOOD
7. ADDING EXTENSION CORDS
We recommend that the buyer refrain from using an extension cord between the
DC power source and the inverter’s DC input. Connecting an extension cord to
the DC input will create a voltage drop, entailing reduced efficiency. Instead, you
should use the extension cord to connect the AC output and the AC appliance.
You may use up to 100ft (30m) of high-quality extension cord. A longer cord may
result in reduced power.
8. MEASURING AC VOLTAGES
The output wave of the AC inverter is a PURE SINEWAVE. If you choose to
measure the AC output voltage, you must use an AUTHENTIC RMS VOLT
METER. Using any other type of voltage measuring device will result in an AC
voltage reading 20 to 30V lower than the rated value. The reading will only be
accurate when using an authentic RMS voltmeter.
9. VENTILATION
IMPORTANT ! Make sure the fan keeps revolving as long as the device is in use.
Check the inverter for possible malfunctions if the fan does not work when the
inverter is being used.
Make sure the fan is not blocked in order to avoid poor ventilation.
