CSOL06
V. 02 – 14/06/2016
4
©Velleman nv
•
All modifications of the device are forbidden for safety reasons.
Damage caused by user modifications to the device is not covered
by the warranty.
•
Only use the device for its intended purpose. Using the device in
an unauthorised way will void the warranty.
•
Damage caused by disregard of certain guidelines in this manual
is not covered by the warranty and the dealer will not accept
responsibility for any ensuing defects or problems.
•
Keep this manual for future reference.
4.
Features
•
recharges by sunlight via 0.33 W solar panel
•
lights up in the dark through the 0.07 W LED
•
shines at full strength (0.07 W + 0.5 W LEDs) when the PIR
sensor detects motion within 5 m range
•
no wiring, fast and easy installation
•
for wall mounting
•
on/off switch
•
stainless steel housing
•
water & corrosion resistant
•
IP44
•
for outdoor use.
5.
Operation
Refer to the illustrations on page
2
of this manual.
5.1
Switching on and Off
•
To switch on the device, push the on/off button
[1]
in the AUTO
position (down). The lamp will automatically light up in standby
mode at night: only the LED behind the horizontal strips
[5]
is lit.
•
When the device detects motion, the bottom LED
[6]
lights up as
well to illuminate the area.
•
To switch off the device, push the on/off button
[1]
to the OFF
position (up). The battery will charge, but the lamp will not light
up at night.
5.2
The Battery
It is recommended to charge the battery for 1 or 2 days in direct
sunlight before the first use. This will increase battery life
expectancy.
