6
q
R1 : 270 (2-7-1-B)
q
R2 : 18K (1-8-3-B)
q
R3 : 18K (1-8-3-B)
2. 1/4W Resistors
R...
q
J
1. Jumper wires
Construction
By using the jumpers, the receiver can be set up for two
output possibilities:
1.
The output is on
while the transmitter is pressed
(MOMENT), this is mostly used for operating a door lock,
garage door etc.
2.
The output switches (on/off)
every time the transmitter is
pressed (toggle), this setting is mostly used for switching
alarms in and out, for operating central door locking systems,
for switching a lamp on and off, etc. This setting must be
used for use with our car alarm K3504.
NOTE :
q
R4 : 33K (3-3-3-B)
q
R5 : 5K6 (5-6-2-B)
q
R6 : 2K7 (2-7-2-B)
q
R7 : 6K8 (6-8-2-B)
q
R8 : 6M8 (6-8-5-B)
q
R9 : 1K (1-0-2-B)
q
R10 : 1K (1-0-2-B)
q
R11 : 100K (1-0-4-B)
q
R12 : 47K (4-7-3-B)
q
R13 : 47K (4-7-3-B)
q
R14 : 470 (4-7-1-B)
q
R15 : 470K (4-7-4-B)
q
R16 : 10K (1-0-3-B)
q
R17 : 10K (1-0-3-B)
q
R18 : 10K (1-0-3-B)
q
R19 : 220K (2-2-4-B)
q
R20 : 680 (6-8-1-B)
q
R21: 2K2 (2-2-2-B)
