4
Assembly hints
1.3 Soldering Hints :
1-
Mount the component against the PCB surface and carefully solder the leads
2-
Make sure the solder
joints are cone-shaped and shiny
3-
Trim excess leads as close as possible to the solder joint
REMOVE THEM FROM THE TAPE ONE AT A TIME !
AXIAL COMPONENTS ARE TAPED IN THE
CORRECT MOUNTING SEQUENCE !
You will find the colour code for the resistances and the LEDs on our website:
http://www.velleman.be/common/service.aspx
4
Assembly hints
1.3 Soldering Hints :
1-
Mount the component against the PCB surface and carefully solder the leads
2-
Make sure the solder
joints are cone-shaped and shiny
3-
Trim excess leads as close as possible to the solder joint
REMOVE THEM FROM THE TAPE ONE AT A TIME !
AXIAL COMPONENTS ARE TAPED IN THE
CORRECT MOUNTING SEQUENCE !
You will find the colour code for the resistances and the LEDs on our website:
http://www.velleman.be/common/service.aspx
